Take away the film paper.
Remove the screws securing the bracket.
Take away the film paper holder.
Remove the two screws from the ink bottle baffle.
Remove the baffle.
Pour out the ink from all the ink bottles.
Ensure that the ink in the ink bottle is emptied completely.
Cover the bottle mouth with a tissue and tighten the cap.
After pouring out all the ink, cover the baffle.
Two screws secure the baffle.
Open the top cover and move the ink cart to the middle position.
Use a syringe to extract remaining ink from the bag and tube.
Extract all ink from six ink sacs separately.
Pack the ink bag in a sealed bag, seal the bag tightly.
Then push the ink cart to the initial position on the right side.
Remove the waste ink bottle.
Extract the residual waste ink from the waste ink tube.
Empty the ink from the waste ink bottle.
Folding the waste ink tube fixed with zip ties.
Put the waste ink bottle back.
Secure the ink cart belt with zip ties.
Put in the fixed filling sponge.
Remove the platform.
Open the air cargo box.
Place sponges at the four corners of the bottom of the box.
Put the printer in.
Organize filling material to secure the printer and prevent moving.
Printer accessory box.
Install the cover. Lock the box tightly.
After locking everything, the packing is completed.