 01Check the ink levels in the ink bottles and add ink as needed. |
 02The shelf life of opened ink is 3 months; discard any ink that has not been used for a long time. |
 03Clean the print head in the software to flush out any air or sediment in the ink paths. |
 04Print a test page from the software to check the print head status. |
 05Perform a head cleaning and nozzle check before printing your pattern every day. |
 06If the nozzle check is not good, perform another head cleaning. |
 07If the lines on the test page are complete, the print head is in good condition. |
 08Once the nozzle status is perfect, you can start printing your patterns. |
|